Table of Contents
Advertisement
Figure 2. Configure TCP/IP Menu
Following are descriptions of the Configure TCP/IP menu options.
v Option 1. Work with TCP/IP interfaces: Select this option to add TCP/IP
v Option 2. Work with TCP/IP routes: Select this option to add route information
v Option 3. Change TCP/IP attributes: Select this option to run the Change
v Option 4. Work with TCP/IP port restrictions: Select this option to add port
v Option 5. Work with TCP/IP remote system information: Select this option to
v Option 10. Work with TCP/IP host table entries: Select this option to add host
v Option 11. Merge TCP/IP host table: Select this option to merge or replace a
v Option 12. Change TCP/IP domain information: Select this option to change
8
OS/400 TCP/IP Configuration and Reference V5R1
interface information to the list of current interfaces or to display, change, print,
or remove TCP/IP interface information that you have already added. Select this
option to start or end a TCP/IP interface.
or to display, change, print, or remove route information that you have already
added.
TCP/IP Attributes (CHGTCPA) command.
With this option you can change User Datagram Protocol (UDP) checksum
processing, IP datagram forwarding, IP time-to-live values, and other attributes
that relate to the TCP/IP protocol stack.
restrictions or to display, remove, or print port restrictions that you have already
added.
add or remove X.25 data network addresses or to print the list.
IP addresses and their associated host names to the host table or to display,
change, print, rename, or remove items that you have already added.
local host table by using the Merge TCP/IP Host Table (MRGTCPHT) command.
TCP/IP domain information.
Note: Prior to Version 4 Release 2, the Configure TCP/IP menu contained both
an option 12 and an option 13. In Version 4 Release 2, the functions of
options 12 and 13 were combined, and option 13 (Change Remote name
Advertisement
Table of Contents
