Chapter 2. Installing The Keyboard And Using The Smart Card Reader; Installing The Device Drivers; Installing The Keyboard - Lenovo USB Smartcard Keyboard User Manual

Chapter 2. Installing the keyboard and using the smart card
reader
This chapter provides information about installing the keyboard and using the smart card reader.

Installing the device drivers

Before installing the keyboard, you must install the hotkey driver and the smart-card-reader driver.
Otherwise, you cannot use some functions of the keyboard. For example, if you are using a Windows
XP operating system, you must install the smart-card-reader driver to use the smart card reader of the
keyboard; if you are using a Windows 7, Windows 8, or Windows 8.1 operating system, you must install the
smart-card-reader driver to use some specific functions like the secure PIN entry.
Note: If the hotkey driver and the smart-card-reader driver are already installed on your computer,
uninstall the drivers before you install the new ones. See "Uninstalling the device drivers" on page 6 for
more information.
To install the device drivers, do the following:
1. Go to http://www.lenovo.com/support/keyboards.
2. Locate and download the installation files.
3. Double-click each installation file, and then follow the instructions on the screen to complete the
installation.

Installing the keyboard

This topic provides instructions on how to install the keyboard after you install the drivers.
To install the keyboard, do the following:
1. Adjust the tilt feet to set the keyboard near your computer to your preference.
2. Route the keyboard cable into the right or left cable slot according to your preference.
3. Connect the keyboard cable to an available USB connector on the computer. The operating system will
identify the keyboard and the smart card reader. Then, the keyboard is ready for use.
Figure 2. Connecting the keyboard to the computer
© Copyright Lenovo 2013 5