Installing The Keyboard; Using The Smart Card Reader - Lenovo 51J0155 User Manual

4. Click Lenovo keyboard smart card reader driver. The InstallShield Wizard window opens.
5. Click Next and follow the instructions on the screen to install the driver.
6. Click Finish.
7. Restart your computer if necessary.
Note: For the Microsoft Windows XP users, it is recommended to install the smart card reader driver for
using the smart card reader of the keyboard. For the Microsoft Window Vista users, it is also
recommended to install the smart card reader driver for using other specific functions including
the secure PIN entry.

Installing the keyboard

This section provides instructions on how to install the Lenovo USB Smartcard Keyboard to your
computer after you install the drivers.
Note: For the ergonomic information of the Lenovo products, go to:
http://www.pc.ibm.com/ww/healthycomputing/index.html
To install the keyboard to your computer, do the following:
1. Adjust the tilt feet to set the keyboard near your computer to your preference.
2. Route the keyboard cable into the right or left cable slot according to your preference.
3. Connect the keyboard cable to the USB port on your computer. The operating system will identify the
keyboard and the smart card reader, and the keyboard is ready for use.

Using the smart card reader

To use the smart card reader of the keyboard, do the following:
1. Insert a smart card into the smart card reader slot with the contact pad facing up, as shown:
Note: For information on using your smart card, contact your smart card vendor.
6
Lenovo USB Smartcard Keyboard User Guide