Assembly Instructions - Nexgrill 740-0593A Care And Use Manual

Figure 2240
CSA International
Project 2056659
10 of 25

ASSEMBLY INSTRUCTIONS

1. Battery Installation
Unscrew the ignition button housing (A); insert the battery
from pack G into the housing with the positive terminal (+)
facing outward (B). Replace the ignition button housing
after the battery has been installed as shown in fig. 5.
2. Propane Tank Assembly
Make sure the LP regulator is located under the island hole
as shown in Fig. 6.
Use the 4 screws and clamp provided to
attach the brass connector to the island as
shown in Fig. 7. The brass connector is
located between the flex tube and gas
hose.
Fig. 7
9
Fig. 5
Fig. 6