Table of Contents
Advertisement
To return a product for service:
1. Obtain a Return Material Authorization (RMA) number by completing and faxing a copy of
the RMA Form (See Appendix D) to (678) 624-0294. You may E-Mail the same information
instead to:
2. Plainly write the RMA number on the outside of the product shipping container.
NOTE: Writing the RMA number on the outside of the shipping container will
help us to return your equipment to you sooner. Thank you.
3. Return the product, freight prepaid, to the address below:
NOTE: All returned material must be shipped freight prepaid. C.O.D.
shipments will not be accepted.
Please contact Customer Service at the number above if you have any questions regarding
service procedures.
1.8
MANUALS
If you have any suggestions concerning this, or any Wegener Manual, please Email them to
manuals@wegener.com. If you would rather mail them, please do so to the address shown
below. Our preference is that you copy the page in question, mark it up, and fax or mail us the
copy. We do appreciate constructive criticism.
service@wegener.com
Service Department RMA# ________
Wegener Communications, Inc.
359 Curie Dr.
Alpharetta, GA 30005
Attn: Manuals
Wegener Communications, Inc.
11350 Technology Circle
Duluth, GA 30097
1-3
UTY4000-003
Advertisement
Table of Contents
