Table of Contents
Advertisement
Anterus™ RFID Solution
ANT-TAG Mounting/Installation
ANT-TAG Tags can be mounted on a variety of non-metallic items. Where permanent fixing is required,
VHB double-sided tape is used (L-TA400).
ANT-TAG Antenna Orientation
For optimal RF reception, the tags should be mounted in the same orientation as the antenna used on the
reader. The system will still function if the orientations do no match however, the range will be
decreased. It is best to mount all tags in the same orientation no matter if it matches the orientation of the
antenna. The tag's vertical orientation is with the antenna of the tag facing up or down. The tag's
horizontal orientation is with the antenna to the either side. FIG. 5 provides an Orientation Diagram for
the ANT-RDR, and ANT-TAG:
ANT-RDR
FIG. 5
ANT-RDR / ANT-TAG Antenna Orientation
ANT-BDG ID Badge Tag
The ANT-BDG badge tag (FG5172-02) is worn by personnel to identify them, track their location within
a facility and trigger system events while in proximity to an ANT-RDR RFID Reader (FIG. 6).
FIG. 6
ANT-BDG ID Badge Tag
6
Vertical Orientation
ANT-TAG
Horizontal Orientation
ANT-RDR
ANT-TAG
Anterus RFID Solution
Advertisement
Table of Contents
