Setting Your Local Areac; Etting The Length - GE 29893 User Manual

S Y
ETTING OUR
1. If you just adjusted the Time/Date menu, skip to step
2. If you haven't adjusted any other setting, press and
release the MENU button until LOCAL AREA CODE is
displayed.
2. Use NEXT or PREVIOUS to select the first digit.
3. Once the first digit is set, press ENTER.
4. Repeat steps 2-3 until all the digits of the area code
are set.
5. When finished, press ENTER to confirm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To
exit setup, press PLAY/STOP.
TIP: You can use the keypad to enter all the digits in one
step. To enter 317, press 3,1, and 7. Then press ENTER.
S
ETTING THE
L
ENGTH
This setting allows you to set the maximum length of
time allowed for incoming messages. You can choose
from 1-4 minutes.
1. If you just adjusted the Local Area Code menu, skip to
step 2. If you haven't adjusted any other setting, press
and release the MENU button until
MESSAGE LENGTH is displayed.
2. Use NEXT or PREVIOUS or press the keypad number
(1-4) for the desired setting.
3. When finished, press ENTER to confirm. The unit
beeps.
NOTE: To skip to the next setting, press MENU. To
exit setup, press PLAY/STOP.
14
L A
OCAL REA
I M
NCOMING
C
ODE
MENU button
PREVIOUS button
ESSAGE
ENTER button
PLAY/STOP
button
N
ERASE
MEM DIAL STORE
1 2
A
ABC
QUICK DIAL
4 5
B
GHI JKL
7 8
PQ
TUV
C
RS
MEM DIAL
0
*
TONE OPER
mic
NEXT button
O
VOL +
ON/OFF
VOL -
FLASH
3
DEF
REDIAL/PAUSE
6
MNO
HOLD
9
WX
YZ
#
SPEAKER