Optical Drive - HP TouchSmart 9100 Maintenance And Service Manual

To install the Bluetooth module, reverse the removal procedures.

Optical drive

CD and DVD media can be removed from the optical drive manually, even if the system is not running.
1.
Prepare the computer for disassembly (see
on page
2. Place the computer face down on a soft, flat surface.
3. Remove the hard drive/memory cover (see
4. Remove the stand (see
5. Remove the I/O cover (see
6. Remove the feet (see
7. Remove the back cover (see
8. Disengage the optical drive eject button connector from the cable guide at the side of the optical
drive cage.
9. Loosen the captured screw that secures the optical drive cage to the computer (1).
26 Chapter 4 Removal and Replacement Procedures
12).
Stand on page
I/O cover on page
Feet on page
Back cover on page
Preparing to disassemble the HP TouchSmart PC
Hard drive/memory cover on page
17).
15).
16).
22).
14).