4.
Remove the stand (see
5.
Remove the I/O cover (see
6.
Remove the feet (see
7.
Remove the back cover (see
8.
Remove the amp board shield (see
9.
Remove the system board shield by removing the nine screws that secure it to the computer, and
then lifting it off the computer.
To install the system board shield, reverse the removal procedures.
Graphics card – Discrete or UMA
1.
Prepare the computer for disassembly (see
on page
2.
Place the computer face down on a soft, flat surface.
3.
Remove the hard drive/memory cover (see
4.
Remove the stand (see
5.
Remove the I/O cover (see
6.
Remove the feet (see
7.
Remove the back cover (see
8.
Remove the amp board shield (see
9.
Remove the system board shield (see
Stand on page
I/O cover on page
Feet on page
Back cover on page
12).
Stand on page
I/O cover on page
Feet on page
Back cover on page
17).
15).
16).
22).
Amp board shield on page
Preparing to disassemble the HP TouchSmart PC
Hard drive/memory cover on page
17).
15).
16).
22).
Amp board shield on page
System board shield on page
28).
14).
28).
28).
Graphics card – Discrete or UMA
29