C. Chirp Indicator; D. Parking Light - Autopage C3-RS-1000 OLED Operation Manual

Professional oled 2-way 915 mhz. fm remote car starter & 6 channel alarm system with built-in temperature sensor and two-way serial port data link
Table of Contents

Advertisement

SVMASTER -
+
+
I I
B. LED display:
LED
Off
Slow Flash
Fast Flash
On (Solid)
Pause On
C. CHIRP INDICATORS:
Chirp
1 chirp
2 chirps
3 chirps
4 chirps
6 chirps
E. ACTIVE ARMING – LOCK & ARM:
1.Press the
2.The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle door will lock upon arming when interfaced with the security system.
AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
SILENT ARMING: Spin up the
transmitter
arm confirmation will be through the vehicles parking lights only.
SENSOR BY-PASS:
Bypass The Zone 4: Spin up the
press the button
times within 3 seconds. This will arm the security system and
by-pass the zone 4-shock sensor.
The system will chirp one additional time to confirm the sensor bypass mode was
activated. The sensor bypass feature is programmed to activate for one arming cycle
only. The security system will return to normal operation during the next arming cycle.
HIDDEN ALARM FUNCTION (Silent Alarm): Spin up the
then press the "Hidden Alarm" button or press the
press the
button to activate the hidden alarm function. The security system will arm
and with "Hidden Alarm Function" The siren / horn will be silenced even if the unit is
triggered in the armed status. Notification will only be through the hand held two-way
SVMASTER -
C3RS1000 OP 3/08
Channel # 5 Timer Output
Channel # 6 Timer Output
Switching code For 2nd Car Operation.
Button Function Selection
Confirm Button / Back to Main Page
Feature Selection
Function
Disarmed
Armed
Passive Arming
Valet Mode
Password Lock-Out
Function
Arm
Disarm
Ajar Warning
Disarm / Triggered
Car Locator
button on the transmitter.
switch to the page
and
buttons at the same time to arm your security system, No chirp sound will be heard,
switch to the page
or press the
button on the transmitter two
1
Programming required
Programming required
For regular remote transmitter
For Two way Remote transceiver
For Two way Remote transceiver
For Two way Remote transceiver
LED
Function
1 flashes... pause
Zone 1 / Trigger on Hood
2 flashes... pause
Zone 2 / Trigger on Trunk
3 flashes... pause
Zone 3 / Trigger on Door Switch
4 flashes... pause
Zone 4 / Trigger on Shock Sensor
5 flashes... pause
Zone 5 / Trigger on Ignition Switch

D. PARKING LIGHT:

Parking light
Function
1 flash
Arm
2 flashes
Disarm
3 flashes
Disarm / Triggered
12 flashes
Car Locator
Constant On
Under Remote Start
and then press the "Silent Arm" button or press the
1
2
and then
switch to the page 1 and
button first; within 3 seconds
14
http://www.msvmaster.lv
-
http://www.msvmaster.lv
-

Advertisement

Table of Contents
loading

Table of Contents