Panasonic HDC-SD90P Owner's Manual page 41

5
(Only when setting the region of your travel
destination)
Touch / to select your travel
destination and touch [ENTER].
p Touch [SUMMER TIME SET] to set daylight
saving time.
summer time setting is turned on. The
travel destination time and time difference
from the home region time are set forward
by one hour. Touch [SUMMER TIME SET]
again to return to the normal time setting.
p Close the setting by touching [EXIT].
appears and the time of the travel destination
is indicated.
To return the display to the home setting
Set the home region using Step 1 to 3, and close the setting by touching [EXIT].
p If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
[DATE/TIME]
It is possible to change the date and time display mode.
[DATE FORMAT]
It is possible to change the date format.
[ZOOM/REC DISPLAY]
You can set the display method of the zoom button icons (
icon ( ).
[OFF]:
[ON]:
[EXT. DISPLAY]
Please refer to page 98.
[ECONOMY]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
p The Power Save function will not activate when:
L connected to AC adaptor
L using the USB cable for PC, DVD burner etc.
L PRE-REC is used
appears and the
[OFF]/[D/T]/[DATE]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[OFF]/[ON]
If no operation is performed for approx. 5 seconds, the icon disappears.
Constantly displayed
[OFF]/[SIMPLE]/[DETAIL]
[OFF]/[5 MINUTES]
The local time at the selected
travel destination
The time difference between
the travel destination and the
home region
/ ) and recording button
T W


41
VQT3J56