Editing Motion Pictures; (Selecting The Edit From The Setting Area); Trimming One Selected Portion In The Scene (Trimming) - Panasonic HDC-SD90P Owner's Manual

Editing video on your computer

Trimming one selected portion in the scene (Trimming)

You can trim selected portions of scenes. Add to favorites and remove from favorites cannot be performed on this window. Only playback
positions registered beforehand by the playback device are used.
[Trimming]
A
Previous/next frame buttons
Playback knob
Drag the knob to the right or left to
change the playback position.
B
Starting and ending point knobs
Drag the knobs to the right or left to change
the starting and ending point positions.
Spots added to favorites
C

Editing motion pictures

(Selecting the edit from the Setting area)

1
Select [Trimming].
The [Trimming] tab is displayed, and the scene selected in the
Project board area is displayed.
2
Click to play the content.
●
During playback, the Play button changes to the Pause button.
●
Click or to skip spots where [Playback from here (Add to
favorites)] has been set.
(For details about [Playback from here (Add to favorites)] →52)
: [Current point]: Displays the position of the Playback knob.
A
[P/B time]: Indicates the motion picture length.
(Example of Displayed Time) 01:02:03.45
3
Select the [Trimming] range.
[Set start point] : Click to set the starting point.
B
[Set end point] : Click to set the ending point.
C
You can also select the trimming range by adjusting the
starting and ending point knobs. The portion between the
starting and ending point knobs is the portion of the scene that
will be trimmed.
4
Click [Apply].
The results of editing are applied to the edit video window.
Advanced Features
Hours:Minutes:Seconds
(up to two digits after the decimal point)
HD Writer AE 73