Rf Modulator Connection - Toshiba D-VR660KU Owner's Manual

RF MODULATOR CONNECTION

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF
modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a Modulator/Antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch.
For more details, follow the manual supplied with the RF modulator.
rear of your TV
ANT. IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• The quality of picture may become poor if this unit is connected to an RF modulator.
20 EN
HDMI OUT
DVD/VCR
DIGITAL AUDIO
S-VIDEO IN --- AUDIO --- OUT AUDIO OUT OUT
COAXIAL
L
R
IN
IN --- VIDEO --- OUT
RCA audio RCA video
cable cable
R L
RF coaxial
TO TV AUDIO IN VIDEO IN
cable
rear of your
RF modulator
rear of this unit
OUT
DVD DVD/VCR
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO --- OUT
VIDEO OUT
Y L L
IN
ANTENNA
P
B
L R R
OUT /C IN
B
IN --- VIDEO --- OUT
P
R
R
/C
R
ANTENNA
RF coaxial cable
3 4
CHANNEL ANT. IN
Set channel 3 or 4
VHF / UHF
OUT
RF coaxial
cable
IN
or
cable TV
company
antenna