Dvd/Vcr To Tv Connection - Toshiba SD-V394SC Owner's Manual

DVD/VCR to TV connection

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
75 ohm Coaxial Cable (supplied)
75 ohm Coaxial Cable
(supplied)
75 ohm Coaxial Cable
(supplied)
2I30301A-En_p14-17
Downloaded From Disc-Player.com Toshiba Manuals
VHF/UHF IN
Splitter 75 ohm Input
75/300 ohm outputs
(not supplied)
Splitter 75 ohm Input
300 ohm outputs
(not supplied)
15
TV
Note: If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the "TV" mode.
TV with single 75 ohm VHF/UHF antenna
input
TV
Note: If a VHF or UHF antenna is used,
set the TV/CABLE menu option
UHF
to the "TV" mode.
VHF
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
TV
Note: If a VHF or UHF antenna is used,
UHF
set the TV/CABLE menu option to
the "TV" mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
1/12/06, 17:43
15