Toshiba D-VR660KU Owner's Manual page 128

Available fo~~?;1
,
1} Make one of the following connections, depending on the capabilities of your display device.
analog audio
(AUDIO OUT (DVD»
good picture
(S-VIDEO OUT)
better picture
(COMPONENT VIDEO OUT)
rear of your
TV
R L
AUDIO IN
RCA audio cable S-video cable
or
component video cable
rear of this unit
DVD
AUDIO
OUT
DVD
AUDIO S-VIDEO
OUT
AUDIO
OUT
2) Plug in the power cords of the devices to the AC outlet.
OR
,
1) Before turning on any equipment, connect this
unit to your TV with a commercially available
HDMI cable.
2) Turn on your TV first, then turn on this unit. Set
the video input on your TV to HDMI in.
best picture
(HDMIOUT)
3) Press [HOMI] to select the HDMI output mode.
There are four HOMI video output choices - 480p,
720p, 1080i and 1080p.
HOMI cable
To an HOMI
compatible port
HDMIIN
-
A display equipment
with an HOMI compatible port
Note:
• Because HDMI is an evolving technology, it is
possible that some devices with an HDMI input
may not operate properly with this DVD recorder.
rear
of yourTV