Table of Contents
Advertisement
Step 1: Unpacking
Accessories
Check for the supplied accessories below.
• Audio/Video Cable
• RF Cable for TV
• Remote Control
• Batteries for Remote Control (AA Size)
• User’s Manual
* Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
Step 2: Connecting DVD
Recorder-VCR to the TV using
the RF Cable
To receive television programmes a signal must be
received from one of the following sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
Make sure that both the television and the
DVD Recorder-VCR are switched off before
Note
connecting the cables.
Remove the aerial or network input cable from
1
the television.
Connect this cable to the 75Ω coaxial socket
2
marked
on the rear of your DVD Recorder-
VCR.
Plug the RF cable supplied into the
socket on
3
TV
your DVD Recorder-VCR.
18 - English
Plug the other end of the RF cable into the con-
4
nector previously used for the aerial on the televi-
sion.
To obtain better quality pictures and sound on
your television, you can also connect your
Note
DVD Recorder-VCR to the television via the
SCART cable (see next page) if your televi-
sion is equipped with this type of connection.
Aerial
AUDIO OUT
R
R
L
L
DIGITAL AUDIO OUT
VIDEO
OPTICAL
COAXIAL
TV
ANT
RF cable
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
