Canon PowerShot SX160 IS Getting Started page 76

4
Shoot.
Shooting Still Images
Focus.
z
Press the shutter button halfway. The
camera beeps twice after focusing, and
green frames are displayed to indicate
image areas in focus.
Several green frames are displayed when
X
multiple areas are in focus.
z If [Raise the flash] appears on the screen,
press the <h> button to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
z Press the shutter button all the way
down.
X As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z Keep the camera still until the shutter
sound ends.
Your shot remains displayed on the
X
screen for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Shoo ing (Smart Auto)
43