Editing Movies - Canon PowerShot SX160 IS Getting Started

Editing Movies

You can cut movies to remove unneeded portions at the beginning or end.
Movie Editing Panel
Movie Editing Bar
1
Choose [*].
z Following steps 1 – 5 on = 1 10 – 111,
choose [*] and press the <m> button.
The movie editing panel and editing bar
X
are now displayed.
2
Specify portions to cut.
z Press the <o><p> buttons to choose
[ ] or [ ].
z To view the portions you can cut
(identified by [
the <q><r> buttons or turn the <5>
dial to move [ ]. Cut the beginning of the
movie (from [
cut the end of the movie by choosing
[ ].
z Even if you move [ to a position other
than a [ ] mark, choosing [
cut the portion from the nearest [
the left, and choosing [
portion from the nearest [
3
Review the edited movie.
z
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
The edited movie is now played.
z
To edit the movie again, repeat step 2.
z To cancel editing, press the <o><p>
buttons to choose [
button, choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button again.
Movies
] on the screen), press
]) by choosing [
] will only
] will cut the
] to the right.
]. Press the <m>
], and
] to
139