Canon PowerShot SX160 IS Getting Started page 54

4
Shoot.
Shooting Still Images
Focus.
z
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and green frames are displayed
to indicate image areas in focus.
z If [Raise the flash] appears on the screen,
press the <h> button to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
z Press the shutter button all the way
down.
X As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
z Keep the camera still until the shutter
sound ends.
X Your shot remains displayed on the
screen for about two seconds.
z Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Trying the Camera Out
21