Canon PowerShot SX160 IS Getting Started page 19

Trying the Camera Out
j,4
Shoot.
Shooting Still Images
CDFocus.
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and green frames are displayed
to indicate image areas in focus.
If [Raise the flash] appears on the screen,
press the <
~
> button to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
®Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
Keep the camera still until the shutter
sound ends.
Your shot remains displayed on the
screen for about two seconds.
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
19