Open Session Menu; Open Session Menu Functions - IBM Terminal Emulation TN5250 User Manual

2-6 Chapter 2
Figure 2-4 Open Session Menu
*Session ______________________________
Auto Start no____
*Host Name *DFLT__________________________ OCS_Gateway
Port Number
*IBM Terminal Type
Right Ctrl:Current Selection
F1:Help
F5:Refresh
The parameters displayed in this menu appear as data entry fields. To use
these fields:
1 Position the cursor to the left of each field in the menu, and enter the
appropriate data.
2 Press
to save your data and exit the menu.
F6
Table 2-3 describes the data fields in the Open Session menu.
Table 2-3 Open Session Menu Functions
Field
Session
Auto Start
Host Name
Port Number
IBM Terminal Type
Open Session
*DFLT 23
*CALC____________ IBM-5251-11
F3:Exit Menu F4:List
F6:Save F12:Prev Menu
Description
Type the name of your session in this field.
Type a yes or a no in this field. Yes prompts
the emulator to start the session immediately
after exiting this menu.
Enter the name of the host to which you want to
connect.
In this field, type the number of the port to which
you want to connect. The recommended entry for
TN5250 is 23.
Enter the type of terminal to which you are
connecting.
[Default Values]
Tab:Next Field