Table of Contents
Advertisement
H1/3 WHITE/BLUE 200 mA (-) channel 3 output
This wire provides a (-) 200 mA output whenever the transmitter button(s)
controlling channel three is pressed. This output can be programmed to
provide the following types of output (see
section of this guide):
•
A validity output will send a signal as long as the transmission is
received.
•
A latched output will send a signal continuously when the channel
three button(s) is pressed and released. The signal will continue
until channel three is pressed again.
•
A latched/reset with ignition output works similar to the latched
output, but will also reset (output will stop) when the ignition is
turned on and then off.
•
A 30 second timed output will send a signal for 30 seconds when
channel three is pressed. This output can be shut off during the
30-second period by pressing Channel 3 again.
•
This output can also be programmed to provide a second unlock
pulse when the unlock button is pressed a second time after
disarming the system. This can be used to unlock the passenger
doors when installing progressive door locks.
6
System Features Learn Routine
© 20 0 8 D i re cte d E l ec tro n i cs- Al l ri g ht s res e r v e d.
Hide quick links:
Advertisement
Table of Contents
