Nortel M7324 Quick Reference Manual page 3

Your Enterprise Edge M7324 Telephone
Memory and line buttons
are buttons with indicators for one
touch dialing, feature operation or line access.
Display
shows the time, date, call information,
and guides you. The lower line of the display
is reserved for display button instructions.
Display buttons
Dial pad
Volume control
Feature button
starts or ends a feature.
Hold button
Release button
cancels active calls.
Indicators
appear beside lines and features.
Using display
buttons
Using Button
Inquiry
Adjusting display
contrast
Selecting a ring
type and volume
level
Mounting the
telephone
Page 1 Enterprise Edge M7324 Quick Feature Guide
Three display buttons appear directly
below the display. When active, these
buttons appear in capital letters on
the second line of the display. In this
guide, display buttons appear as
underlined, capital letters: for
example, OK.
Check what is programmed on your memory buttons.
1. Release all calls or lines with dial tone.
ƒ•‚
2. Press
3. Press the button(s) that you want to check and read the display.
ƒ
4. Press
ƒ•‡
1. Press
UP DOWN
2. Press or
OK
3. Press when finished.
ĥfl
1. Press
⁄ ¤ ‹
2. Press , ,
3. While the telephone is ringing, press
level.
OK
4. Press to store the volume level and ring.
The M7324 telphone can be placed on any level surface. It cannot be
wall-mounted.
.
when finished.
.
for the level you want.
.
›
, or NEXT to hear the different ring types.
,
√
Display message
Contrast level 2 Contrast level 2
Contrast level 2 Contrast level 2
DOWN DOWN DOWN DOWN UP UP UP UP OK OK OK OK
Display button
message
Display buttons
to adjust the volume