Specify Project Properties - IBM WebSphere Adapters User Manual

Specify project properties

You name your connector project, optionally adding it to an Enterprise Application
project. You also specify the configuration used for developing the resource
adapter.
You perform all of these tasks from the Connector Project dialog.
Connector Project dialog
1. Name your Connector Project.
Enter a project name in the Project name field. The name is automatically
appended to the workspace location.
2. Set Target Runtime to <None> and select IBM Websphere Adapter for the
Configurations
The IBM Websphere Adapter configuration contains the IBM WebSphere Adapter
Foundation Classes 6.2, J2C Module 1.5 and Java 5.0 Project Facets. You can
modify these facets by clicking the Modify button.
3. Optional: Specify an Enterprise Application Archive (EAR) project name.
a. In the EAR Membership section, click the Add project to an EAR check
box. Enter or select a name in the EAR project Name field or click New
and then name the new EAR project.
Note: You can generate an EAR file later, after building and testing the
adapter.
4. Click Next. This displays the Project facets dialog.
You are ready to specify project facet properties.
WebSphere Adapter development overview
31