Split - EE Tools MaxLoader User Manual

MaxLoader User's Guide
88
All programmers except TopMax and ChipMax must use the
Concurrent Gang Mode for multiple socket operations.

Split

When programming devices for a 16-bit or 32-bit environment, you will need to
split your data onto two or four devices.
NOTE: Do not run this operation in "Concurrent Mode".
EXAMPLE 1: PROGRAMMING TWO 8-BIT EPROM AS FOLLOWS:
Byte $0000
Byte $0001
Byte $0002
Byte $0003
1. Load a 16-bit file into the buffer.
2. Select the target device from menu.
3. Insert the target device (#1) into the ZIF socket.
4. Click on EVEN in Split data menu.
5. Program the device (#1).
6. Remove the device (#1) and insert the second device (#2) into the ZIF socket.
7. Click on ODD.
8. Program the second device.
Byte $0000 Byte $0001
Byte $0002 Byte $0003
: :