File / Reload - EE Tools MaxLoader User Manual

MaxLoader User's Guide
44
The default selection on File Load menu is in Binary Format. To select any of
the HEX files mentioned above, choose "All HEX File" by pressing ⇓ button.
When you have selected the desired file, press the OPEN button to load the file
into the data buffer. If you are programming a PLD, you will want to load a
JEDEC file. The procedure is identical to loading a data file, except that the
files in the current directory will have the JED extension. If your selected
device is an Altera MAX family, the file you should load is a POF extension.
The MaxLoader uses a RAM buffer to hold data. After loading a file into the
buffer, you can edit the buffer data. If you load a JEDEC file, you may use (the
vector pattern edit) command to view or edit the fuse map and (test/vectors) for
any test vectors that may have been in the JEDEC file.

File / Reload