Getting Started / Installation; Installation Requirements; Hardware Installation; To Install The Software From A Cd Drive - EE Tools MaxLoader User Manual

MaxLoader User's Guide

2. GETTING STARTED / INSTALLATION

Installation Requirements

Hardware Installation

To Install the software from a CD drive

To Start the windows software

To install software and connect to PC for USB programmers

10
The great advantage of a programmer is their programming speed and
superior software. All programmers are controlled via a host IBM PC computer.
The operating software has a user-friendly interface that includes window pull-
down menus and virtual memory management to deal with very large files.
MaxLoader is designed to operate with any 386, 486, Pentium, PS/2, Portable
(notebook), compatibles running WIN 95/98/ ME/NT/2000/XP and Vista. The
computer requires a CD-ROM drive, but a hard disk drive is also recommended.
The following section details the procedure for accomplishing the hardware
installation procedure. TopMax / ChipMax easily connect to any parallel printer
port in your computer and TopMaxII / ChipMax2/ UniMax / ProMax-8G (4G)
connects to USB 2.0 port in your PC.
Place CD-ROM in the CD-ROM or DVD drive.
Choose a programmer model from the list of files located on the menu
screen. The SETUP program will then launch the installation
procedure.
To run the windows software, select your product model shortcut in the
Windows Start Menu / Programs list.
From Configuration Menu, you can choose one of the
TopMax/ChipMax/ChipMax2/TopMaxII/UniMax/ProMax-8G (4G) that you
use.
The software works with Windows OS 98, SE, Me, 2000, XP and Vista.