Device / Read; Device / Verify - EE Tools MaxLoader User Manual

MaxLoader User's Guide
72

Device / Read

Read the data in the source device mounted on the ZIF socket into the buffer for
examination.
The checksum will be displayed on the checksum line. The buffer may be
edited, saved to a disk, or used to duplicate the chip.
CAUTION: Reading the device into the buffer destroys the buffer contents
through the specified range. Make sure everything in the buffer that is needed
has been saved.
PLD test vectors are not stored in a logic device; therefore, they cannot be read.
The test vector buffer will be empty after reading the PLD.
NOTE: Devices that have been secured cannot be read properly. Secured chips
may appear all blank, fully programmed, or scrambled.

Device / Verify

Assure that data in the device matches data in the memory buffer. If your
device has the security fuse blown, a verification error is detected. The verify
operation requires that the exact data pattern or file that was used to program
the device be resident in the memory buffer.