Menu Map; Configuration (Dmx); Starting Address - Chauvet Hurricane Haze 2D User Manual

Menu Map

Configuration
(DMX)
Starting
Address
Hurricane™ Haze 2D User Manual Rev. 10
Mode Programming Steps
DMX Mode d***
Haze Volume
Manual Mode
Blower Speed
Set this product in DMX mode to control it with a DMX controller.
·
Connect this product to a suitable power outlet.
·
Turn this product on.
·
Connect a DMX cable from the DMX output of the DMX controller to the
DMX input socket of this product.
The Hurricane™ Haze 2D has one DMX personality, a 2-channel mode for basic
control.
The Hurricane™ Haze 2D uses up to two channels in its 2-channel DMX mode, which
defines the highest configurable address to 511.
When selecting a starting DMX address, always consider the number of DMX
channels the selected DMX mode uses. If you choose a starting address that is too
high, you could restrict the access to some of the product's channels.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until d*** shows on the display.
2. Use <UP> or <DOWN> to select the starting address.
Description
001–512
Selects the DMX starting address
h001–h005
Low–high
f001–f005
Low–high
Page 11 of 16