Fisher & Paykel DishDrawer DD60DI7 Quick Start Manual page 2

After the wash
The dishwasher will beep six times to indicate the end of the wash program.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time. The fan assists with drying and uses
negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
Dos and don'ts of loading
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
Ensure that water reaches all items on
the adjustable racks.
Closed Drawer autolock using the remote control
The Closed Drawer autolock feature will lock the dishwasher when the drawer is closed. To enable this feature - with the drawer closed
(and no wash program or delay start is active), press and hold
together. Ignore any beeps prior to the 6 seconds. The drawer is now locked. To unlock, press
together. The drawer is now unlocked.
On double products, the drawers must be locked independently.
If the power to the dishwasher is disconnected, the drawer will remain locked.
Note: this feature is highly recommended if the dishwasher is to be used in motor homes.
Preference options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
Option
What does it do?
How to change the setting of an option
CHECK & OPEN
1
Protruding items will stop the
Check that there is no wash underway, then open the drawer.
internal lid of the drawer from
2 ENTER MENU & SCROLL TO OPTION
sealing properly, which could result
To enter the menu: press
in a service call.
release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
Option
Overcrowding reduces wash
Possible settings
performance.
Example
CHANGE SETTING
3
Press
to press
SAVE SETTING & QUIT MENU
4
Press and hold
If plates and cutlery are nesting,
*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
they are less likely to be cleaned
well.
For more info
For detailed information on the
features of your dishwasher
For warranty information
If you...
Dishware is blocking water from
reaching items on the adjustable have any questions or comments
racks. need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product
on the remote for 6 seconds until you hear a sequence of 4 beeps
Rinse aid
Regulates the amount of rinse aid Refer to the 'Water softener'
dispensed. Reduce this setting if there is section of the 'User guide' for
excess foam after a wash. Increase this details.
setting if dishes are wet or streaky after
a wash.
first with one finger, then with another finger, hold both until one long beep sounds, then
. To know which option you're in, keep track of the sequence of options using the table below.
Rinse aid Water softener*
1 to 5
4 indicators lit = setting is 4
3 indicators lit = setting is 3
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need
3 times.
until a beep sounds and the control panel reverts to showing the wash program currently selected.
see your 'User guide'
see your 'Service and warranty' booklet
see your 'Service and warranty' booklet or contact us
NZ
toll-free, 24/7
AU toll-free, 24/7
USA toll-free, 24/7
CA
toll-free, 24/7
once. You will hear a sequence of 4 beeps
Water softener* Beeps at end of wash
Your dishwasher is factory-set to beep
six times at the end of a wash. You can
turn this setting off.
Beeps at end of wash
0 to 5 On/Off
On
Off
0800 372 273 www.fisherpaykel.co.nz
1300 650 590 www.fisherpaykel.com.au
1 888 936 7872 www.fisherpaykel.com
1 888 936 7872 www.fisherpaykel.ca
590194C 09.12