Before You Begin - NetComm Freshtel NB9 Configuration Manual

Hide thumbs Also See for Freshtel NB9:

Before You Begin

Please note that all information in this guide is applicable to both the

Netcomm NB9 and NB9W modem/routers.

We strongly recommend you ensure that the latest firmware update for this

device has been downloaded and installed. For further information, visit the

manufacturer's website at

have a fully Freshtel-compatible firmware, check the Voice menu of your

Netcomm for the 'Enable Pass '*' Call Feature to Sip Proxy feature. This is

required for full Freshtel compatibility.

If you are using the Freshtel Internet Phone on your PC with the same

Freshtel number that you wish to use in your Netcomm, we advise you to

uninstall or disable the Freshtel softphone. Your Freshtel account can only be

active at one point on our network at any one time, and having two identical

active accounts will cause conflicts. Similarly, only register your Freshtel

account on one line of the Netcomm, and not both lines.

If you do not yet have a Freshtel account, you should go to our website at

http://www.freshtel.net

the Netcomm.

http://www.netcomm.com.au

Figure 1.1

Figure 1.2

and register a new account before starting to configure

. To ensure that you

Table of Contents

Do you have a question about the Freshtel NB9 and is the answer not in the manual?

Freshtel nb9w