IBM THINKPAD THINKPAD A30 Service And Troubleshooting Manual page 74

v Use of pulse dialling, when this equipment is connected to the same line as
other equipment, may give rise to bell tinkle or noise and may also cause a
false answer condition. If such problems occur, the user should NOT
contact the Telecom Faults Service.
v This equipment shall not be set to make automatic calls to the Telecom 111
Emergency Service.
v This equipment might not provide for the effective hand-over of a call to
another device connected to the same line.
v This equipment must not be used under any circumstances that might
constitute a nuisance to other Telecom customers.
v Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the software. In order to operate within the
limits for compliance with Telecom's specifications, the software shall be set
to ensure that calls are answered between 3 and 30 seconds of receipt of
ringing.
v All persons using this device for recording telephone conversations shall
comply with New Zealand law. This requires that at least one party to the
conversation is to be aware that it is being recorded. In addition, the
Principles enumerated in the Privacy Act 1993 shall be complied with in
respect to the nature of the personal information collected, the purpose for
its collection, how it is to be used, and what it disclosed to any other party.
For the modem with approval number PTC 211/01/050
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct
operation at the higher speeds for which it is designed. Telecom will accept no
responsibility should difficulties arise in such circumstances.
If a charge for local calls is unacceptable, the 'Dial' button should not be used
for local calls. Only the seven digits of your local number should be dialled
from your modem. Do not dial the area code digit or '0' prefix.
This equipment should not be used under any circumstances that may
constitute a nuisance to other Telecom customers.
Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the equipment (PC) associated with this
64
®
ThinkPad A30 Series Service and Troubleshooting Guide