1060 Pci Express Mini Card For Wireless Wan - IBM THINKPAD T400S Hardware Maintenance Manual

Table 13. Removal steps of PCI Express Mini Card for wireless LAN (continued)
When installing:
• In models with wireless LAN card that has two antenna connectors, plug the gray cable into the jack labeled
MAIN or M, and the black cable into the jack labeled AUX or A on the card. If the computer you are servicing has
three cables, put the white cable in the cable protection tube.
• In models with wireless LAN card that has three antenna connectors, plug the gray cable (MAIN) into the jack
labeled TR1, the white cable (3rd) into jack labeled RO or TR3, and the black cable (AUX) into jack labeled
TR2 on the card.

1060 PCI Express Mini Card for wireless WAN

For access, remove these FRUs in order:
• 1010 Battery pack
Table 14. Removal steps of PCI Express Mini Card for wireless WAN
Note: Loosen the screws
1
, but do not remove them.
.
Chapter 8 Removing and replacing a FRU
83