Table of Contents
Advertisement
Removing and replacing a FRU
1050 Mini PCI adapter
For access, remove this FRU:
v "1010 Battery pack" on page 64
Note: Some models do not have the Mini PCI card socket.
Note: Loosen the screw 1a or 1b , but do not remove
it. In order to loosen 1b , use the driver FRU
9900712 and TR7bit FRU 00P6967 (See "Tools" on
page 176).
Step
Screw (quantity)
1a
M2.5 x 3.5 mm, +/- Head BK (1)
1b
M2.5 x 3.5 mm, Hexagon Head BK
(1), Tip: TR7, Torx — 802.11a/b Model
Note: The TR7 torx screw is required to be present when
the 802.11 a/b card is installed in order to meet
FCC requirements. Do not replace this with any
other screw type.
The following illustrations for step 3 to step 6 show the
combination of the Mini PCI Wireless LAN card.
(continued)
70
ThinkPad R40
2
1a
1b
3
Torque
0.294 Nm
(3 kgfcm)
0.294 Nm
(3 kgfcm)
Advertisement
Table of Contents
