IBM THINKPAD T400S Hardware Maintenance Manual page 117

• "1120 Keyboard bezel and speaker assembly" on page 94
• "1130 5-in-1 Media Card Reader adapter" on page 98
• "1140 Bluetooth–wireless radio switch FPC" on page 98
• "1150 LCD unit" on page 100
• "1160 System board, fan assembly, and 34-mm ExpressCard slot frame" on page 103
Table 26. Removal steps of I/O sub card and base cover assembly
Step Screw (quantity)
1
M2 × 4 mm, bind-head, nylon-coated (1)
2
M2 × 6 mm, bind-head, nylon-coated (1)
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the
base cover, you need to apply the following labels:
8 : Blind sheet L
14 : Homologation label
Following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
Note: If the Windows Authentication label (COA)
with the label attached to the customer, or provide a letter to the customer stating what the label was
originally on the system and what the label part number, serial number, and product key were.
Note:
Color
Black
Black
7 is attached to a part that is replaced, return the old part
Chapter 8
Torque
0.181 Nm
(1.85 kgfcm)
0.181 Nm
(1.85 kgfcm)
.
Removing and replacing a FRU
111