Basic Commands (Direct Access); Lock; Unlock - Clifford 470.4X Owner's Manual

Basic commands (Direct Access)

Lock

Press and release
The doors lock and the horn honks (if connected) and
parking lights flash once. The
and the System Status Icons update. If Valet mode* is On the doors
lock and the
VALET
system normally.
If the door was open when locking, you are notified of an active zone
immediately after locking the system. The horn in the vehicle "honks"
again. The 2-way remote control sounds a short "error" tone, and the
LCD displays the door icon.
Note: the optional door input and horn honk must be connected for
the system to give notification.
To Lock and Panic
Press and hold
The system Locks (or Locks in Valet) and, after 2 seconds, sounds
the horn and flashes the parking lights. The
and horn honks to confirm. Press the
output.

Unlock

Press and release
The doors unlock (if connected), and the horn honks (if connected)
and parking lights flash twice. The
confirm and the system status icons update. If Valet mode* is On the
doors unlock and the
© 2011 Directed Electronics. All rights reserved.
LOCKED
text and tone play. Exit Valet mode to Lock the
UNLOCKED
text and tone play.
VALET
text and beeps play to confirm
PANIC
or button to stop the
text and beeps play to
6:30
text displays
13