Install Support Brackets; Install The Window Lock And Sash Seal - Soleus Air HCC-W12ES-A1 Operating Insructions

Install Support Brackets

1. Hold each support bracket flush against the outside of
the window sill. Tighten each bracket to the bottom of
the cabinet as shown below. Mark the brackets at top
lever of the window sill and then remove.
MARK
2. Assemble the sill angle brackets to the support brack-
ets at the marked position as shown above. Hand
tighten, but not all the way for any changes that may
need to be made later during installation.
3. Install the support brackets (with sill angle brackets
attached) to the bottom of the cabinet as shown below.
4. Tighten all 6 bolts securely.

Install the Window Lock and Sash Seal

1. Trim the sash seal to fit the width of the window. Insert
the sash seal into space between the upper and lower
sashes.
2. Attach the right angle safety lock as shown below.
SCREW &
LOCKNUTS
9
SAFETY LOCK
LONG SCREW