Soleus Air HCC-W12ES-A1 Operating Insructions page 10

ASSEMBLY & INSTALLATION (CONT.)
Installing the Chassis into the Cabinet
1. Team lift (two people) the air conditioner chassis and
carefully slide it into the cabinet. Let the front of the air
conditioner hang out approximately 6".
2. CAUTION: DO NOT PUSH ON THE CONTROLS OR
FINNED COILS.
3. Be sure the chassis is firmly seated in the back of the
cabinet.
4. Insert all screws removed during window installation
and reattach the front face plate, front panel, and the
air filter. Use the REMOVE CHASSIS instructions and
figures 3-7 on page 7 for reference.
Extend the Curtain Panels
1. Carefully raise the window to expose the curtain panel
and panel frame. Extend the curtain panels to fill the
window opening.
2. Place the curtain lock between the curtain extentions
and the window sill, drive locking screws through the
lock and into the sill.
Secure the Air Conditioner
1. Secure the left and right flanges on the lower end sides
of the panel with long screws. (See Fig. 12)
2. Drive locking screws through upper frame holes into
window sash.
10
Fig. 12