Operating Your Air Conditioner - Soleus Air HCC-W12ES-A1 Operating Insructions

OPERATING YOUR AIR CONDITIONER

REMOTE CONTROL
1. ON/OFF - Press the ON/OFF button to turn
the A/C on or off. When the unit is turned off,
the Timer function will be cancelled. The set
temperature will be saved.
2. "—"- Press the "-" button to decrease the
temperature when the unit is on. Stop pressing
the button when the desired temperature is
displayed. Temperature range: 61°F - 90°F.
"+" - Press the "+" button to increase the
temperature when the unit is on. Stop pressing
the button when the desired temperature is
displayed. Temperature range: 61°F - 90°F.
3. FAN - Press the FAN button to turn on fan mode.
4. H FAN - Press this button to set the fan speed
to high. Can be used in COOL or FAN mode.
5. M FAN - Press this button to set the fan speed
to medium. Can be used in COOL or FAN mode.
6. L FAN - Press this button to set the fan speed
to low. Can be used in COOL or FAN mode.
Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries.
COOL - Press the COOL button to turn cooling
7.
mode on or off.
8. DRY - Press the DRY button to turn dehu-
midifying mode on or off. Fan speed can only be
set to low in this mode.
9. FILTER RESET -
button to turn off the "CHECK FILTER" LED
light when on.
10. ENERGY SAVER -
button to turn on energy saver mode. When the
unit is in energy saver mode, the Energy Saver
light will turn on. Selecting Energy Saver mode
will cycle the fan off and on with the compressor
to limit energy consumption. Use this feature
when the room is unoccupied and a greater
range of room temperature is acceptable.
11. TIMER - Press the TIMER button when the
unit is off to set up the Auto-on timer. The hour
indicator on the bottom right of the digital dis-
play will start flashing. Press the "+" or "-"
button to set the timer within 1-24 hours. To
cancel the timer, press the TIMER button again.
Press the TIMER button when the unit is on to
set up the Auto-off timer. The hour indicator
on the bottom right of the digital display will
start flashing. Press the "+" or "-" button to set
the time within 1-24 hours. To cancel the timer,
press the TIMER button again.
12
Press the FILTER RESET
Press the ENERGY SAVER