Debug Vqpc - Cisco Catalyst 4500 Series Command Reference Manual

debug vqpc

debug vqpc
To debug the VLAN Query Protocol (VQP), use the debug vqpc command. To disable the debugging
output, use the no form of this command.
Syntax Description
all
cli
events
learn
packet
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Examples
This example shows how to enable all VQP debugging:
Switch# debug vqpc all
Switch#
Related Commands Command
vmps reconfirm (privileged EXEC)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-180
debug vqpc [all | cli | events | learn | packet]
no debug vqpc [all | cli | events | learn | packet]
(Optional) Debugs all the VQP events.
(Optional) Debugs the VQP command-line interface.
(Optional) Debugs the VQP events.
(Optional) Debugs the VQP address learning.
(Optional) Debugs the VQP packets.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Immediately sends VLAN Query Protocol (VQP) queries to
reconfirm all the dynamic VLAN assignments with the
VLAN Membership Policy Server (VMPS).
OL-25342 -01