Show Policy-Map - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show policy-map

To display information about the policy map, use the show policy-map command.
Syntax Description
policy_map_name
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to display information for all the policy maps:
Switch# show policy-map
Policy Map ipp5-policy
class
set ip precedence 6
Switch#
This example shows how to display information for a specific policy map:
Switch# show policy ipp5-policy
Policy Map ipp5-policy
class
set ip precedence 6
Switch#
Related Commands Command
class-map
policy-map
show class-map
show policy-map interface
OL-25342 -01
show policy-map [policy_map_name]
(Optional) Name of the policy map.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
ipp5
ipp5
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Creates a class map to be used for matching packets to the
class whose name you specify and to enter class-map
configuration mode
Creates a policy map that can be attached to multiple ports
to specify a service policy and to enter policy-map
configuration mode
Displays class map information.
Displays the statistics and configurations of the input and
output policies that are attached to an interface.
show policy-map
2-835