Debug Redundancy - Cisco Catalyst 4500 Series Command Reference Manual

debug redundancy

debug redundancy
To debug supervisor engine redundancy, use the debug redundancy command. To disable the debugging
output, use the no form of this command.
Syntax Description
errors
fsm
kpa
msg
progression
status
timer
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples This example shows how to debug the redundancy facility timer event debugging:
Switch# debug redundancy timer
Redundancy timer debugging is on
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-166
debug redundancy {errors | fsm | kpa | msg | progression | status | timer}
no debug redundancy
Enables the redundancy facility for error debugging.
Enables the redundancy facility for FSM event debugging.
Enables the redundancy facility for keepalive debugging.
Enables the redundancy facility for messaging event debugging.
Enables the redundancy facility for progression event debugging.
Enables the redundancy facility for status event debugging.
Enables the redundancy facility for timer event debugging.
Modification
Support for this command was introduced on the Catalyst 4500 series switch
(Catalyst 4507R only).
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-25342 -01