Cisco Catalyst 4500 Series Command Reference Manual page 412

ipv6 mld snooping last-listener-query-interval
Examples This example shows how to globally set the last-listener query interval to 2 seconds:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# ipv6 mld snooping last-listener-query-interval 2000
Switch(config)# end
Switch#
This example shows how to set the last-listener query interval for VLAN 1 to 5.5 seconds:
Switch# configure terminal
Enter configuration commands, one per line.
Switch(config)# ipv6 mld snooping vlan 1 last-listener-query-interval 5500
Switch(config)# end
Switch#
You can verify your settings by entering the show ipv6 MLD snooping [vlan vlan-id] user EXEC
command.
Related Commands Command
ipv6 mld snooping
last-listener-query-count
show ipv6 mld snooping querier
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-354
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
End with CNTL/Z.
End with CNTL/Z.
Description
Configures IP version 6 (IPv6) Multicast Listener
Discovery Mulitcast Address Specific Queries (MASQs)
that will be sent before aging out a client.
Displays IP version 6 (IPv6) MLD snooping querier-related
information most recently received by the switch or the
VLAN.
OL-25342 -01