Wireless - D-Link Xtreme N Duo DAP-1522 User Manual

Section 3 - Configuration
Site Survey: A function that looks for available wireless networks.
Enable Wireless: Click the check box to enable the wireless function. If
you do not want to use wireless, uncheck the box to
disable all the wireless functions.

Wireless

Service Set Identifier (SSID) is the name of your wireless
Network
network. Create a name using up to 32 characters. The
Name: SSID is case sensitive.
Band Width: Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and
non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n
wireless clients.
Security Mode: Refer to page 77 for more information regarding
wireless security.
Enable:
Enable the Wi-Fi Protected Setup feature.
Wireless MAC
Enabling this option allows the user to manually
Cloning: assign the source MAC address to packets
forwarded by the bridge. If not manually assigned,
the packet's source MAC address field will be
automatically selected as the bridge's MAC address.
MAC Address: Enter the desired MAC address connected to your
bridge to enable the clone function.
Click the Scan button to search for all available devices
Scan:
connected to your DAP-1522's Ethernet ports
D-Link DAP-1522 User Manual
Wireless
60