Networking Basics; Check Your Ip Address - D-Link Xtreme N Duo DAP-1522 User Manual

Wireless bridge/access point

Hide thumbs Also See for Xtreme N Duo DAP-1522:

Table of Contents

Appendix B - Networking Basics

Networking Basics

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP

server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

Click on Start > Run. In the run box type cmd and click OK. (Windows

7/Vista

users type cmd in the Start Search box.)

At the prompt, type ipconfig and press Enter.

This will display the IP address, subnet mask, and the

default gateway of your adapter.

If the address is 0.0.0.0, check your adapter installation,

security settings, and the settings on your access point.

Some firewall software programs may block a DHCP

request on newly installed adapters.

If you are connecting to a wireless network at a hotspot

(e.g. hotel, coffee shop, airport), please contact an

employee or administrator to verify their wireless

network settings.

D-Link DAP-1522 User Manual

Table of Contents