System - D-Link Xtreme N Duo DAP-1522 User Manual

Section 3 - Configuration
Save to Local Use this option to save the current access point
Hard Drive:
configuration settings to a file on the hard disk of the
computer you are using. First, click the Save button.
You will then see a file dialog, where you can select a
location and file name for the settings.
Load from Local Use this option to load previously saved access point
Hard Drive: configuration settings. First, click Browse to find a
previously save file of configuration settings. Then,
click the Load button to transfer those settings to the
access point.
Restore to This option will restore all configuration settings back
Factory Default:
to the settings that were in effect at the time the access
point was shipped from the factory. Any settings that
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the Save
button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Reboot the
Click to reboot the access point.
Device:
Clear Language Click to clear the language pack. This will put the web
Pack: UI back to English.
D-Link DAP-1522 User Manual

System

41