Light Button - Arctic Spa Arctic Ocean Owner's Manual

on when the system is put on standby The filter cycle, the Smart Winter mode (see pg 19) and
the heater can't start during this time. All keys are disabled except the On/Off key. A second
long press (5 seconds) will restart the system before the 30 minutes ends.
When power is first applied to the spa, it is "On" by default.
Therapy Air Button (Optional)
Press the Therapy Air key to turn Therapy Air on. A second press will turn Therapy
Air off. If Therapy Air is left on, it will automatically shut off 20 minutes after it has
been started.
The Therapy air ON triangle icon will appear solid on the display when Therapy air is on.

Light Button

Press the light button to toggle the light(s) on and off. If the lights are left on, they
will automatically shut off 2 hours after it has been started. If the spa is equipped
with Northern Lights™, or Northern Lights™ Deluxe, the different lighting
sequences can be cycled by pressing the light key on and off repeatedly.
The light ON triangle icon will appear solid on the display when the light is on.
To Program the Duration of the Filtration Cycles:
The system will automatically perform four filtration cycles per day, 6 hours apart.
During a cycle, the following sequence is executed:
* Pump 2, Pump 3 (on 3 pump systems) and Blower start at high speed for 1 minute
* Pump 1 then starts and runs at low speed for the preset number of hours
* Ozone output is turned on (optional)
To set the duration of the filtration cycles (the amount of time Pump 1 will be on), follow this
procedure:
17
17