Topside Control Panel - Arctic Spa Arctic Ocean Owner's Manual

Topside Control Panel

Your spa control has been specifically designed so that by simply connecting the spa to a
properly grounded source, and following the start-up procedures in this manual, the spa
will automatically heat to the set temperature. Many other functions, such as filtration,
safety checks and maintenance reminders have been automated so that your spa experience
will be as carefree as possible.
But you're in charge! The topside control (TSC) panel allows you to set the temperature,
initiate the filtration cycle, control the lights, and activate or deactivate the pump(s) and
blower. The TSC display responds to let you know you have pressed a button, and that
the selected function has been performed.
Power-Up Detection
After a power-up, on the first 10 seconds the display will alternate between the software
number and revision, the display will then blink until somebody presses a key. This feature
lets you know that a power failure has occurred and all settings have returned to default.
Pump 2
Pump 1
Filter Cycle
Pump 3
Therapy Air
Function Indicator Section
Up
Down
A small inverted triangle over the
Arrow
Arrow
symbol indicates that the
corresponding function is active.
Light Control
15
15
Display Panel