Table of Contents
Advertisement
3 Operation
Operation is completely automatic, and no user intervention is required.
If your HomePlug devices have difficulty communicating with each other, check the following:
• Try plugging the unit into an adjacent plug.
• Use a pin and hold the Reset Button down for two seconds on each unit you are trying to connect. The unit
lights should flash. Then units will then connect based off factory settings.
• HomePlug Pro 4-Port Bridge works better when plugged directly into the wall socket. Connecting the Home-
Plug Pro 4-Port Bridge into the power strip or surge protectors may degrade the network performance.
8
Advertisement
Table of Contents
