Security Button; Creating A New Security Network; Adding Adapter Cto Existing Network Ab (Adapter Aand Adapter B) - LevelOne PLI-3210 User Manual

2 Security Button

This section describes how to use Security button for configuration in the following situations:

Creating a new security network

Two unassociated Adapters (Adapter A and Adapter B) are forming a new network—Network AB
The procedure is as follows:
5. Press and hold the security button on Adapter A for 10 seconds and release it when device LED auto reboots.
The password to Adapter A becomes "Random_A"
6. Press and hold the security button on Adapter B for 10 seconds and release it when device LED auto reboots.
The password to Adapter B becomes "Random_B"
7. Currently, Adapter A and Adapter B are not networked
8. Press and hold the security button on Adapter A for 2 seconds then release.
9. The Power LED on Adapter A starts to flash.
10. Within 120 seconds after the Power LED on Adapter A starts to flash, press and hold the security button on
Adapter B for 2 seconds then release.
11. Both Adapter A and Adapter B are now networked together.
Adding Adapter C to existing Network AB (Adapter A and Adapter B)
One unassociated Adapter C is added to an existing Network AB.
6